Meltblown Filter Cartridges
Graded-density 100% PP depth cartridges, 1–50 µm, 10"–40". The standard RO pre-filter.
Filter Consumables
Quick answerFilter consumables are the replaceable media inside a filter housing. Filtsap supplies meltblown (spun), string-wound, pleated, high-flow and specialty membrane cartridges, plus PP and nylon filter bags, from 0.1 to 200 micron, for RO pre-filtration, process liquids and final polishing.
Wound Filter Cartridges
PP string wound on a rigid core for higher flow, pressure and viscous liquids.
Pleated Filter Cartridges
Large-area pleated media down to 0.22 µm with a low pressure drop for final filtration.
High-Flow Filter Cartridges
Large-diameter (6") pleated cartridges handling up to 50+ m³/hr each, so fewer cartridges and smaller housings.
Filter Bags
PP felt and nylon mesh bags, 1–200 µm, size #1 and #2, with welded seams.
Specialty Filter Cartridges
PES, PTFE, nylon and PP membrane cartridges for sterile, solvent, gas and chemical duty.
Request a quote for filter consumables
Share the model, size, flow rate or a photo of your existing part. We will reply within 2 working hours.
- Direct manufacturer, not a trader
- GST verified · 24BFVPC6209L1Z5
- 4.5★ buyer rating on IndiaMART
- Pan-India dispatch & export
FAQs
Which filter cartridge should I use for RO pre-filtration?
A 5 micron meltblown (spun) PP cartridge is the standard choice. On dirty feed water, put a 10–20 micron wound cartridge or bag filter in front of it.
What are high-flow cartridges used for?
They replace many standard 2.5" cartridges in large RO and process lines. One 60" high-flow element can do the job of ten or more standard cartridges, which means faster change-outs and a smaller housing.
Planning a filtration or water treatment project?
Send your requirement: a product, a spare or a complete plant. Our team will reply with a quote within 2 working hours.